These submersible water pumps are great for everything from fountains to hydroponic systems. The pumps have an inside threaded fittings and the flow is non-adjustable. Powerful oil-free, rare earth rotor magnet. Ceramic shaft and bearing insures reliability. Trouble free one moving part. Strainer protects impeller from damage. Comes with a 120 volt cord. Include inlet and outlet fittings.
Adapter to connect to a low-pressure tank
Easy to add on and use
Specifically built for Blumat systems
Adapts to standard 8 mm tubing
Built to last
THRU-HULL Fittings w/ 2 Washers Black 3/4"
Thru-Hull fittings with washers for use in irrigation and hydroponics.
TUBING AIR LINE -Silicone 1/4" 1 ft
Our disc filters are micron-precise, high efficient and large volume filtration capable, meeting diverse requirements on size, flow rate and filtration precision. With this disc filter, you can just clean it after weeks at a time. Just loosen the nut that holds the discs together and clean it in the water.
To attach 8 mm Blumat water supply line to a rain barrel or water storage tank.
This is your classic bulkhead fitting, made in Austria, high quality and efficiency for a Blumat System. Bulkhead fittings allow you to penetrate through a wall or barrier while allowing passage within the fitting. This allows you to tap into a tank of water while allowing water to pass through the bulkhead fitting, and into a water supply line. We have these pre-drilled into our 5-gal bucket reservoir, see related products below. Have your own reservoir? No problem, simply drill 1/2" holes into your own water tank and convert it into a Blumat Reservoir.
We have even higher quality bullhead fittings, some that stop water flow when disconnected. Check out our bulkhead fittings category.
This is the bulk version of this item, so doesn't come with packaging for stores (makes it less-expensive for your convenience).
*Reservoir not included
BALL VALVE 1/4" 1 .
3/8" TEE 1 .
3/8" END (INSERT) PLUG . EP455
3/8" ELBOW 1 .
1/4" TEE 1 each
1/4" CONNECTOR - Short
BLUMAT Distribution Dripper (10 pack)
Makes watering the perfect amount easy. Gives small amounts of water as the soil needs it to ensure your plants don't get too much or too little.
Distribution drippers can be used in relatively large pots, containers or beds in order to evenly spread water to your plants.
Contains: 10 distributors and 3mm drip tubing.
Hydrologic Smallboy Sediment Pre-Filter
Reduces sediment, dirt, oils, and suspended solids
Replace after 3,000 gallons or when clogged
ActiveAqua Fill/Drain Combo Kit
Fill/drain combo kit for use with the Active Aqua system.
(1) Active Aqua 1/2" fill/drain fitting
(1) Active Aqua 3/4" fill/drain fitting
(2) Active Aqua extension fittings
(2) Active Aqua screen fittings
The Alfred Horticulture brand produces some of the best water pumps for hydroponic set-ups, and are specifically adapted for modern hydroponic applications.
Alfred pumps offer high output and are equipped with rust-resistant ceramic shafts and fully sealed motors that are safe against warping ensuring safety, reliability as well as long-lasting durability. All Alfred hydroponic pumps are easy to install, run smooth and quiet and are ideal for indoor grow operations. Alfred Horticulture feature pumps for all sizes of operations.
Once a grower calculates the minimum number of gallons needed for the system in place, it's easy to choose a hydroponic pump to fit the operation. The Alfred 1340-gallon-per-hour high output submersible pump especially designed for indoor hydroponics applications in larger grow operations. Like all the best water pumps for hydroponics, it is equipped with wear-resistant ceramic shaft that ensures long life, without worrying about swelling from rust or oxidation caused by salt or fertilizers.
Wear-resistant ceramic shaft ensures long life
Fully submersible, or inline operation
Fully sealed motor ensures safety, reliability and durability
With flow adjuster
Easy to install and maintain
Fittings included: 1x 3/4" - 2x 1"
Filter sponge included
1 Year warranty
Red Lion Water Pump (3/4 HP)
Red Lion 3/4 HP 10500 GPH Cast Iron Sewage Pump
Ideal for high volume sewage, effluent, and general wastewater applications in places like parking lots, leaching fields, and laundry facilities.
Features & Benefits
Automatic submersible cast iron sewage pump.
PSC dual bearing motor with overload protection.
Capable of passing up to 2" diameter semi-solids.
Piggyback tethered float switch.
Not suitable for pond use.
Eco Pump 291 GPH
This line of adjustable water pumps offer an energy efficient magnetic ferrite rotor with a ceramic shaft, vastly improving GPH and head pressure that is needed in hydroponic systems, fountains and more. These pumps are manufactured with a built-in flow regulator allowing full adjustability of your water movement.
Included with each pump are three sizes of fittings that easily attach to the outside threaded distribution outlet
High powered magnetic drive
Filter protected impeller
Optional in-line use
One year manufacturer warranty
Includes 3/8", 1/2" and 3/4" barbed connectors
EcoPlus Pump Protector Filter Bag
Protects the underwater pump from small debris and sediment.
FlexiTank - 25 gal
The Flexi Tank revolutionizes water storage. It is everything you need in one compact box. It requires no tools for assembly, reduces storage and shipping costs and takes minutes to assemble. It really couldn’t be simpler. Unlike other water butts and barrels, the Auto Pot Flexi Tank can be stored away when not used, can fit where other reservoirs cannot go and is adaptable in ways standard reservoirs are not.