Clone Start is a ready-to-use foliar spray that stimulates root growth and boosts immune system defenses. Clone Start contains a specialized carrier that delivers a clone-specific nutrient profile directly into the plants’ cells. This ensures your clone has everything needed to build a solid foundation of roots resulting in a better yield. Clone Start also increases resistance to pathogens and diseases that can harm your clone and slow down initial growth. We all know poor clones grow into poor plants so give your clones the extra boost they need to grow into high-quality, high-yielding plants. Clone Start works in conjunction with any type of clone gel or clone powder.
Heat Mat - Super Sprouter
Warms root area approximately 10–20° F over ambient temperature to improve germination process. Helps gardeners have better success rates with seedlings and cuttings. Heavy-duty construction makes this mat very durable. More than 20% larger than competitive mats. This allows even warming of your entire tray. More consistent heating with fewer hot spots than other seedling heat mats.
Note: If we're out of this one we might send you the Jump Start brand instead. Same use.
Stim-Root Cloning Powder
Rooting hormone powder.
No.1 0.1% IBA (softwood)
No.2 0.4% IBA (semi-hardwood)
Stim-Root, like other rooting hormones, will not make roots grow, rather it enhances the plants own ability to produce roots by supplying plant hormone at the point of rooting to help initiate root development. For medium cuttings use Stim Root #2 Indole-3-butyric acid IBA 0.4%. Stim-Root #2 has been proven to aid in the rooting of semi-hardwood cuttings such as summer flowering shrubs, woody houseplants, Hoya, (wink wink) etc. A semi-hardwood cutting may be defined as a cutting that requires secateurs or pruners to cut, without having yet developed bark.
No.3 0.8% IBA (hardwood)
Rootech Cloning Gel
Rootech Cloning Gel™ is an exceptional and unique recipe containing a powerful hormone especially formulated to promote rapid, healthy root development during vegetative propagation. At application, Rootech’s unique formulation surrounds the stem with sustenance it can immediately use.
While Technaflora’s original formulation is among the strongest cloning gels on the market with a concentration of 0.55% (5.5 g/l) IBA, a potent rooting hormone, the manufacturing process ensures the highly concentrated gel is evenly dispersed, protecting developing rootlets and plant tissues. Rootech Cloning Gel™ is ideal for propagation of the most hard-to-root plants. It can also be diluted with water for use on cuttings that will form roots more easily.
Rootech Cloning Gel™ is packaged in a ready-to-use, wide-mouthed container, into which several cuttings can be dipped at the same time without the risk of mess and spills. The gel format ensures ease of use, while avoiding the risks of inhaling dusty powders. This power-packed cloning gel consistently fosters robust clones with healthy, fast-growing root systems.
Technaflora proudly manufactures Rootech Cloning Gel™ in Vancouver, and its bountiful results and competitive price continue to make it the choice of gardeners everywhere.
Heat Mat Thermostat for Seed Germination
Our heat mat thermostat is digital for greater accuracy.
Water-resistant stainless steel temperature probe
Digital temperature control
Provides constant optimum temperatures for specific crops
Controls temperature in colder or warmer environments
LED mode indicator lights; 3-prong grounded plug
Compatible with all Hydrofarm heat mats
Controllable range from 68 to 108 degrees Fahrenheit
Celsius or Fahrenheit read-out (press Up or Down button to change)
Max current: 8.3 amps/1000 watts
E1:temperature is too low, has exceeded the range limit; or the temperature probe open (break).
E2:temperature is too high, has exceeded the upper limit of the range.
E3:Short-circuit for temperature sensor (probe)
terrafibre Hemp Cubes 2"
The fibres of the industrial hemp plant are currently a byproduct in the farming industry. Hemp seeds are harvested and the remaining plant fibres are unused, often burned on the field. Hemp fibres are an incredibly resilient fibre similar to composition to coco coir but with a neutral ph. At BioComposites Group we want to put money back in the farmer's pocket and to be able to create a product from grower for growers makes sense to us. We use a needle punching technique to intertwine the hemp fibres together to avoid using binder, glues or other synthetic material.
ROCKWOOL Mini Blocks 1.5" Starter 45 MM4040
Starter MINI-BLOCKS can sit in a tray (flat) without support for easy starting of seeds and cuttings. They are individually wrapped to minimize algae growth. For best results put them on the flat side of the GRO-SMART Tray to ensure good airflow around the cubes. Remove wrapping and transplant into any loose media such as GROW-CUBES or GROW-CHUNKS, or leave wrapping on and set on top of a larger GRO-BLOCK. These cubes are popular for production of aquatic plants. The advantage MINI-BLOCKS have over A-Ok Starter Plugs and MACROPLUGS is that MINI-BLOCKS can sit in a tray without support.
ROCKWOOL Grodan Macroplugs (1.5" Round) 50 per bag
Macroplugs are 1.5″ round with a slit that allows easy insertion of a cutting. These loose round plugs fit perfectly into the Gro-Block hole. For best results with these Macroplugs always insert them in a tray with individual cells. The individual cell will make sure the plug stays closed around the stem of your cutting.
ROCKWOOL AOK Plugs - 50 PLUGS 2 "
Grodan Stonewool (rockwool) is made from molten rock spun into cotton candy-like fibers and then compressed into cubes, blocks, or slabs. Where other rockwool brand manufacturers cut all sizes from one batch of wool, Grodan is unique by making different types of fibers. The purpose is to support the requirement of the plant in the different plant stages. Grodan has a tremendous capacity for absorbing nutrient solution while retaining plenty of oxygen for rapid plant growth. Grodan comes in graduated sizes. Seedlings started in cubes are easily transferred to blocks and then onto slabs, if desired. Seedlings or cuttings started in the Grodan cubes can also be transplanted into more traditional planters and growing mediums.
ROCKWOOL 1.5-2" Block - Singles
(Sold in the 'each' if you only need a few.)
Mini-blocks sit in a tray (flat) without support for easy starting of seeds and cuttings.
These Mini-Blocks are individually wrapped in white plastic to minimize algae growth.
Remove wrapping and transplant into any loose Media such as grow-cubes or coconut fiber or leave wrapping on and set on top of a larger gro-block.
JIFFY MINI-1700 (Little Peat Pellets)
JIFFY-7 (Peat Pellets)
Peat pellets w/ 40% coco coir in them. If you only need a couple, this is the right item, otherwise we have larger qties.
Turbo Klone (Clone) *Cloner no dome*
Take your cloning to the next level. No dome, but you probably don't need it.
Turbo Klone (Clone) *Dome Only*
Have you got the TK24 but no dome? Then get this!
Turbo Klone (Clone) *Cloner & Dome*
TurboKlone a streamlined cloner that gives you more sites, keeps temperatures low and provides more oxygen. The central technology behind TurboKlone is simple: A fan that offers a one-two punch!
It's a fresh idea that's putting a new spin on cloning! We were tired of fighting with high temperatures that were killing our roots. We needed a way to clone without having to use timers, chillers or other expensive accessories.
We have TurboKlone machines for cloning at the lowest prices in the hydroponics market. We stock T24, T48, T96, T144, and humidity domes, collars, and system components. The TurboKlone gives you a stronger, longer-lasting product thanks to its smart design and use of innovative technology.
IT'S JUST SO COOL!
Keep temperatures in the cool, the integrated fan mixes with water in a fine spray, not only providing your roots with high dissolved oxygen but ALSO reducing any heat from the pump.
The innovative fan system fits like a glove on the side of the reservoir keeping the unit free from dangling parts and tangling cords like other systems on the market.
AHEAD OF THE CURVE
The TurboKlone is curvy and has rounded edges giving you a stronger, more durable product, instead of having flat walls like a Tupperware tub. Those sexy curves also let you clean the system quickly and easily. You don't have to worry about unwanted root-killing bacteria, and disgusting slime hanging around in tight corners.
Bonus! TurboKlones sexy curves give it greater strength and resilience from external and internal forces.
MORE IS BETTER, MORE SITES, SAME SPACE!
Why settle for less when you can have more? Klone sites that is! TurboKlone's T144, T96, & T48 gives you 60% more clone sites than other systems on the market. The best part? You get more sites in the same footprint as other competitors.
Longer lasting, more durable Polyethylene Collars, with finger recesses for easy removal
Reservoir is stronger and easier to clean- with fill-inside line
Fan system provides constant oxygen and keeps temperatures optimal for rooting
More Klone sites in the same dimensional footprint as other systems on the market
Rapid rooter plugs are fortified with general hydroponic micronutrients for abundant root growth The optimal air-to-water ratio within the plug matrix results in explosive early root growth Use rapid rooter for robust early rooting that supports explosive plant growth. 10x20" tray.
Rapid Rooter Replacements, 50 plugs
Rapid rooter plugs are fortified with general hydroponic micronutrients for abundant root growth The optimal air-to-water ratio within the plug matrix results in explosive early root growth Use rapid rooter for robust early rooting that supports explosive plant growth 50 Plugs per bag Measures 10-1/2-inch length by 12-inch width by 3-1/2-inch height
Often used in cloning machines.
Insert Tray - 72 (12x6)
goes into 10x20" tray. How much smaller do you need? I mean, 72 of them on 1 little tray.