Electronic Ballasts

*NOTE: Matrix is now only double-ended bulbs only*

SolisTek MATRIX DE digital ballast designed for double ended lamps 120/240V (208V Compatible)

Multi-Wattage, Multi-Voltage
(Remote Control sold separately & only 1 remote needed for all MATRIX ballasts)

High Frequency
SolisTek DE digital ballast now operates at 106+ kHz frequency, making it one of the highest frequency ballasts available on the market. The SolisTek DE ballast will operate any single or double ended lamp at its optimal efficiency. We have matched single & double ended lamps in both HPS and MH.

Built-in Digital Timer
Completely customizable on/off schedule settings for any grow cycle. Sync all SolisTek Ballasts on the same schedule with only 1 remote control. Eliminate unnecessary external components.

Remote Control
The exclusive SolisTek remote control will allow you to wirelessly configure the wattage settings from over 70ft away and also set the integrated digital timer for your SolisTek Matrix Ballast(s). The Matrix remote control allows as many Matrix ballasts to be synced to the same schedule eliminating the need for an external controller.

Green LCD Screen 
Digital green read-out to visually display ballast settings and won't disrupt the plant sleep cycle. Dark cycle-friendly!

Ballast Life Timer 
Onboard ballast 'odometer' that will count the number of hours the ballast has been used.

SolisTek digital ballasts are equipped with:
- Ignition Control™ Sequential lamp ignition
- SenseSmart™ Pre-ignition self-diagnostic checks
- Low OUTPUT Total Harmonic Distortion 

The Quantum Dimmable Ballast brings quality, efficiency, and high-intensity illumination to your garden. With a Power Factor of 99.9%—a highly stable output frequency—the Quantum Dimmable ballast lets you run your lamps at the strength you need allowing you to control your light spread. Rigorously engineered, it features a resin cased circuit board with a sealed bearing fan so it will run cooler than any other ballast and it’s been tested to withstand the extreme atmospheric conditions of virtually any growing environment. The Quantum Dimmable Ballast is silent, generator-ready, efficient, and cool-running—this is one cool ballast.

• Run at 100%, 75% or 50% power (400W runs at 100% and 75%)
• Strike both metal halide and high-pressure sodium bulbs
• Accepts 120V/240V with no wiring needed (both cords included); 208V-configurable with electrician assistance
• Accepts 50 Hz to 60 Hz with no extra wiring needed
• Runs 15% cooler than other digital ballasts on the market
• Has a continuous power factor of 99%
• The most stable output frequency of any ballast
• Higher lumen output than magnetic ballasts
• Can run efficiently on generators without flickering
• Resin-sealed circuit board for high humidity installations
• Can easily be used in conjunction with lighting controllers and flip boxes

NOTE: The Quantum QT400 ballast is designed to operate single-ended lamps only, and cannot run double-ended (DE) lamps.

• 630W ceramic metal halide grow light fixture (NO BULBS)
• Over 90% of high reflectivity aluminum ensures your high yield
• Operates on the 120/240v power supply, Premium PGZ18 socket
• Comes with 16ft  120v power cord & 120v/240v adapter

Cypress 315W LEC (CMH) fixture!

This is one of the most affordable, and clean looking 315 W LEC fixture so far.

It has the classic Gavita style for easy hanging, can be plugged into 240 or 120 Volts, has a 16 ft power cord and hangers are included.

Many people don’t understand the need for 600W ballasts when 1000W units are not much more expensive. Those people aren’t commercial growers. 400 Watts is 40% less power then 1000 Watts, so if your plants don’t need the extra oomph of a 1KW ballast you’re either wasting your money or actually making things worse by light-saturating your canopy and harming your yields. This is why a 600W Ballast was vital for TONKA, as we believe in using the right tool for the right job.

Features:

• *Dimmable: 100%, 75% or 50% power
• *Metal Halide and High-Pressure Sodium Bulb compatible. 
• *Accepts 120v or 240v (Both cords included)
• *Allows 50 to 60 Hertz
• *Runs 15% cooler than most other electronic ballasts on the market
• *The most stable output frequency of any ballast
• *Light weight but tough construction

We’ve simplified the Flip technology by incorporating it into our Flip Series ballast.

This technology allows the user to run two separate lights on an alternating 12/12 cycle.

Save space and money by consolidating two technologies into one
ballast.

The Flip Series is not compatible with the NCCS.

Like the Dual Series, the Flip Series has a patented 9‐sided design that allows for quicker dissipation of heat without the advent of large, heavy heat sinks.

Like all of our ballasts, the Flip Series comes with Random Start technology.

Random Start uses an algorithm that will start the ballast within a 0‐15
second window.

This allows for less initial power draw when using multiple ballasts.

All Nanolux ballasts are FCC
compliant – no more RFI problems. ETL listed meeting product safety standards.

The newest generation of the 315w CMH ballast was developed to optimize the output of our 315w CMH lamps. Our lamp and ballast are tuned to work together at over 99% efficiency when operated together, you will receive fewer color shifts, lower lamp temperatures, and less frequency humming.

FEATURES

• CMH lamps
• Soft Start stabilizes start-up loads and extends lamp life & performance
• Low frequency (<200 Hz), Constant output
• 6’ 120VAC power cord provided
• 120/208/240/277VAC voltage sensing input
• UL listed for safety

PROTECTIONS

• Short circuit
• Open circuit
• End of Lamp Life (EOL)
• Hot-Start
• Ignition Failure
• Overheat
• Over/Under voltage

PERFORMANCE

• Rated Voltage: AC90-305VAC
• Input Frequency: 50/60Hz
• Ambient Operating Temperature (TA): -25°C ~ 50°C (-13°F ~ 122°F)
• Crest Factor (CF): <1.5
• Power Factor (PF): ≥0.95
• Max case temperature <80°C (<176°F)
• Total Harmonic Distortion (THD): <20%
• Current Draw: 2.84A @ 120VAC, 1.42A @ 240V, 1.23A @ 277VAC
• Dimensions: L 8.75“x W 5.07“x H 3.125“

Cali Ballast is a 1000 watt grow light ballast is a dimmable ballast, which allows you to reduce your output voltage from 100% to either 75% or 50%.

This feature is great because you can run either a 1000 watt, 600 watts, or 400-watt lamp with this ballast with either an HPS or Metal Halide bulb.

Although many growers will use this feature to reduce the output of their 1000 watt bulbs, we do not recommend this because if you perform this function, your lamp life will be considerably reduced.

It’s always better to purchase appropriate wattage lamps, either metal halide or high-pressure sodium to use with the dimmed ballast.

This means you will use a 1000 watt lamp at 100%, a 600-watt lamp at 75% strength, and a 400-watt lamp at 50% strength.

Set the desired percentage on your ballast and then use the appropriate wattage lamp.

3 year warranty